7 Easy ways to mount your Wyze Cam V2
One of the most intimidating parts of installing a security system is the physical installation. Some of us are handy and welcome the challenge, but I have friends who will purposely avoid the project entirely if it requires drilling into the walls of his home.
Security camera installation doesn’t have to be difficult, and Wyze has done a great job in making these easy to install out-of-the-box. In this article, we go through 7 easy ways you can mount your Wyze Cam V2 to secure your home.
Method 1: Wyze Included Magnetic Washer Mount (no tools)
The way the Wyze Cam V2 is intended to be installed straight out of the box is using a washer that’s included in the kit, and a 3M double stick adhesive to attach that washer to a wall.
Since I’ve bought a few of these to test out, I’ve found that good spots are on or next to windows or corners of the room to be the best spot for this type of mount.
What’s great about doing this is that there are no tools required, just peel, stick, and plug into a nearby outlet. The base of the camera has magnets inside which stick to the metal washer that you attached to the wall.
Bonus: Since it’s included in the box, you don’t have to buy anything extra. It’s like a free mount!
If you do need a replacement mounting kit though, Wyze has you covered and will sell you one for $4. Here’s a link to the page for it on their website.
Method 2: Outlet Mount (no tools)
Some people don’t want to put peel and stick on their walls, but still want to get cameras in their home without putting holes in the walls. Lucky for you, we’ve found something perfect for you!
Meet the outlet mount. The Wyze Cam V2 clips on to the top of the plastic, which then plugs into an outlet. The AC adapter for the camera uses the top outlet, and includes a super short USB cable to hide the cable completely for a very clean look. Guess my inner HGTV fan is showing.
The design allows you to continue to use the bottom outlet for the socket. Be aware though, if your sockets are installed upside down these won’t work very well. I’ve had to do my share of electrical socket flipping to make these work.
These guys cost about $7 each when you buy in a two-pack. Check it out on Amazon.com if you’re interested in this kind of mount by clicking here.
Method 3: Metal door / Refrigerator (no tools)
Another free mounting method you can do without buying anything, and without putting holes in your walls. Since the base of the camera is magnetic and is intended to be attached to a washer on the wall anyway, you can attach it to any magnetic surface.
If you have a metal door to your home with a window, or a magnetic whiteboard, you can simply clip the camera straight to those objects, aim it and call it a day.
Bonus: I’ve yet to see a refrigerator that isn’t magnetic, so put one on your fridge and catch who’s stealing scoops of ice cream late at night.
Method 4: Screw on enclosure (tools required)
These are a bit more expensive, but if you’re going to try and put this outside under a gutter lip or something, this is probably going to be your best bet.
I tested that out myself with two cameras under a gutter. They both worked for more than 6 months before I eventually upgraded to real outdoor cameras. Still, though. Could be a fun project.
Basically, screw the base plate into the wall, and then separately screw the camera into the second piece. A single plastic screw mechanism will hold the two together. You’ll have to loosen it to aim the camera, then tighten once it’s in place.
Not the most secure solution but better than the magnet for sure.
Again–Wyze Cam V2’s are INDOOR cameras. But if you’re feeling adventurous, I mean, they’re less than $25. These would work in the home too very well too. In fact, they claim to be designed for indoors. If you look at them, though, they just don’t look it.
They’re about $9 each bought individually. Here’s a link to check them out on Amazon.com.
Method 5: Wall clip (tools required)
The wall clip screws into the wall, then the Wyze Cam V2’s base clips into the base. This is going to be the most reliable of the mounts for keeping the camera physically in place, but keep in mind that the camera can still be turned.
I personally don’t care for these mounts since they’re clearly indoor only use, and I rent so the least number of holes I put in the wall, the better.
These are very inexpensive and available on amazon for about $9 for a two pack. Click here to check them out on Amazon.com.
Method 6: Twist Mount (no tools)
These mounts are neat. You can twist the cable around a pole someplace, screw in the back of your mount and BAM. Mount done. No tools required. Great for work spaces like above my workbench.
These are a little more expensive than the other options at $12.99 and can be found on Amazon by clicking here.
Method 7: Wall mount locking Pan/Tilt Mount (tools required)
I know, most of you aren’t going to want one of these. They’re a bit bulky and match more of a Victorian style, but I’d be remiss if I didn’t at least point out their advantage here.
They lock the pan/tilt and are screwed into the wall. That means you can’t brush it with your clothes as you walk by and then have a security camera aimed straight at the wall.
You can check out more info about them on amazon and they’re only $8.49. Here’s a link.
Designer Mounts
I didn’t buy one, I swear, but check out some of these designer mounts. They’re very similar to mount in Method #4 in their function, but feature a bunch of near designs. I’ll include links to each one pictured as well if you’re interested.
Keep in mind, some of these may claim to be outdoor enclosures for the camera, they are NOT. They will not protect the camera properly from moisture and extreme temperatures. Now let the cute-ness begin!
Conclusion
My goal is that by showing how many different ways you can easily mount these cameras for super cheap, including the magnetic mount that is included and free, that more people will invest in securing their own home. The cost is minimal and the bragging rights is high.
Stay safe and thanks for reading. Subscribe to my newsletter in the side bar, or at the bottom of the page and receive notifications when new and exciting posts are added. Which, by the way, we’ll never share your e-mail with anyone.